i ntegrated c ircuits d ivision www.ixysic.com ds-laa120-r09 1 laa120 dual single-pole, normally open optomos ? relay e 3 pb part # description laa120 8-pin dip (50/tube) laa120s 8-pin surface mount (50/tube) laa120str 8-pin surface mount (1,000/reel) laa120p 8-pin flat pack (50/tube) LAA120PTR 8-pin flat pack (1,000/reel) parameter ratings units blocking voltage 250 v p load current 170 ma rms / ma dc on-resistance (max) 20 ? applications features description approvals ordering information switching characteristics of normally open (form a) devices ? 3750v rms input/output isolation ? low drive power requirements (ttl/cmos compatible) ? no moving parts ? high reliability ? arc-free with no snubbing circuits ? fcc compatible ? vde compatible ? no emi/rfi generation ? small 8-pin package ? machine insertable, wave solderable ? surface mount and tape & reel versions available ? telecommunications ? telecom switching ? tip/ring circuits ? modem switching (laptop, notebook, pocket size) ? hook switch ? dial pulsing ? ground start ? ringing injection ? instrumentation ? multiplexers ? data acquisition ? electronic switching ? i/o subsystems ? meters (watt-hour, water, gas) ? medical equipment-patient/equipment isolation ? security ? aerospace ? industrial controls form-a i f i load 10% 90% t on t off pin configuration 1 2 3 4 8 7 6 5 + control - switch #1 C control - switch #1 + control - switch #2 C control - switch #2 load - switch #1 load - switch #1 load - switch #2 load - switch #2 ? ul certified component: file e76270 ? csa certified component: certificate 1175739 ? en/iec 60950-1 certified component: tuv certificate b 10 05 49410 006 laa120 is a dual normally open (1-form-a) solid state relay that has two independently controlled, optically coupled mosfet switches. the mosfet switches and photovoltaic die use optically coupled mosfet technology to provide 3750v rms of input to output isolation. the optically coupled outputs, which use the patented optomos architecture, are controlled by a highly efficient gaaias infrared led. this dual switch optomos relay provides a more compact design solution than discrete single-pole relays in a variety of applications, and saves board space by incorporating both switches in a single 8-pin package.
i ntegrated c ircuits d ivision www.ixysic.com 2 r09 laa120 absolute maximum ratings are stress ratings. stresses in excess of these ratings can cause permanent damage to the device. functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. parameter conditions symbol min typ max units output characteristics load current continuous 1 -i l - - 170 ma rms / ma dc peak t = 10ms i lpk - - 400 ma p on-resistance 2 i l =170ma r on -1520 ? off-state leakage current v l =250v p i leak --1 ? a switching speeds turn-on i f =5ma, v l =10v t on --5 ms turn-off t off --5 output capacitance v l =50v, f=1mhz c out -50- pf input characteristics input control current to activate i l =170ma i f --5 ma input control current to deactivate - - 0.4 0.7 - ma input voltage drop i f =5ma v f 0.9 1.2 1.4 v reverse input current v r =5v i r --10 ? a common characteristics input to output capacitance - c i/o -3- pf 1 if both poles operate, then the load current must be derated so that it does not exceed the package power dissipation value. 2 measurement taken within 1 second of on-time. parameter ratings units blocking voltage 250 v p reverse input voltage 5 v input control current 50 ma peak (10ms) 1 a input power dissipation 1 150 mw total power dissipation 2 800 mw isolation voltage, input to output 3750 v rms operational temperature -40 to +85 c storage temperature -40 to +125 c 1 derate linearly 1.33 mw / c 2 derate linearly 6.67 mw / c absolute maximum ratings @ 25c electrical characteristics @ 25c
i ntegrated c ircuits d ivision laa120 www.ixysic.com 3 r09 performance data @25oc (unless otherwise noted)* *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written specifications, please contact our application department. typical led forward voltage drop (n=50, i f =5ma) 35 30 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 led forward voltage drop (v) device count (n) typical turn-on time (n=50, i f =5ma, i l =170ma dc ) 0.625 1.125 1.625 2.125 0.875 1.375 1.875 turn-on time (ms) device count (n) 25 20 15 10 5 0 typical turn-off time (n=50, i f =5ma, i l =170ma dc ) 0.050 0.150 0.250 0.450 0.350 0.550 0.650 turn-off time (ms) device count (n) 25 20 15 10 5 0 typical i f for switch operation (n=50, i l =170ma dc ) 25 20 15 10 5 0 0.15 0.75 1.35 1.95 0.45 1.05 1.65 led current (ma) device count (n) typical i f for switch dropout (n=50, i l =170ma dc ) led current (ma) device count (n) 25 20 15 10 5 0 0.5 0.9 1.3 0.3 0.7 1.1 1.5 typical on-resistance distribution (n=50, i f =5ma, i l =170ma dc ) 35 30 25 20 15 10 5 0 6.5 8.5 10.5 7.5 9.5 on-resistance ( : ) device count (n) typical blocking voltage distribution (n=50) 35 30 25 20 15 10 5 0 305 325 345 365 315 335 355 blocking voltage (v p ) device count (n) typical led forward voltage drop vs. temperature temperature (oc) led forward voltage drop (v) 1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 120 100 i f =50ma i f =30ma i f =20ma i f =10ma i f =5ma typical turn-on time vs. led forward current (i l =170ma dc ) led forward current (ma) turn-on time (ms) 0 5 1015202530354045 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 50 typical turn-off time vs. led forward current (i l =170ma dc ) led forward current (ma) turn-off time (ms) 0 5 1015202530354045 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 50
i ntegrated c ircuits d ivision www.ixysic.com 4 r09 laa120 *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written specifications, please contact our application department. performance data @25oc (unless otherwise noted)* typical on-resistance vs. temperature (i f =5ma, i l =170ma dc ) temperature (oc) on-resistance ( : ) -40 60 50 40 30 20 10 0 -20 0 20 40 60 80 100 typical turn-on time vs. temperature (i l =170ma dc ) temperature (oc) i f =5ma turn-on time (ms) -40 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 -20 0 20 40 60 80 100 i f =10ma i f =20ma typical turn-off time vs. temperature (i f =5ma, i l =170ma dc ) temperature (oc) turn-off time (ms) -40 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -20 0 20 40 60 80 100 typical i f for switch operation vs. temperature (i l =170ma dc ) temperature (oc) led current (ma) -40 2.5 2.0 1.5 1.0 0.5 0 -20 0 20 40 60 80 100 typical i f for switch dropout vs. temperature (i f =170ma dc ) temperature (oc) led current (ma) -40 2.5 2.0 1.5 1.0 0.5 0 -20 0 20 40 60 80 100 load voltage (v) -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 load current (ma) -200 -150 -100 -50 0 50 100 150 200 typical load voltage vs. load current (i f =5ma) typical blocking voltage vs. temperature temperature (oc) blocking voltage (v p ) -40 350 345 340 335 330 325 320 315 -20 0 20 40 60 80 100 typical leakage vs. temperature measured across pins 5&6 or 7&8 (v l =250v) temperature (oc) leakage ( p a) -40 0.025 0.020 0.015 0.010 0.005 0 -20 0 20 40 60 80 100 energy rating curve time load current (a) 10 p s 1.2 1.0 0.8 0.6 0.4 0.2 0 1ms 100ms 10s 100 p s 10ms 1s 100s maximum load current vs. temperature temperature (oc) load current (ma) 250 200 150 100 50 0 -40 -20 0 20 40 60 80 120 100 i f =20ma i f =10ma i f =5ma
i ntegrated c ircuits d ivision laa120 www.ixysic.com 5 r09 manufacturing information moisture sensitivity all plastic encapsulated semiconductor packages are susceptible to moisture ingression. ixys integrated circuits division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, ipc/jedec j-std-020 , in force at the time of product evaluation. we test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. this product carries a moisture sensitivity level (msl) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard ipc/jedec j-std-033 . device moisture sensitivity level (msl) rating laa120 / laa120s / laa120p msl 1 esd sensitivity this product is esd sensitive , and should be handled according to the industry standard jesd-625 . reflow profile this product has a maximum body temperature and time rating as shown below. all other guidelines of j-std-020 must be observed. device maximum temperature x time laa120 / laa120s 250oc for 30 seconds laa120p 260oc for 30 seconds board wash ixys integrated circuits division recommends the use of no-clean flux formulations. however, board washing to remove flux residue is acceptable. since ixys integrated circuits division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. chlorine- or fluorine-based solvents or fluxes should not be used. cleaning methods that employ ultrasonic energy should not be used. e 3 pb
i ntegrated c ircuits d ivision www.ixysic.com 6 r09 laa120 mechanical dimensions laa120 laa120s laa120p dimensions mm (inches) pcb hole pattern 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 9.144 0.508 (0.360 0.020) 0.457 0.076 (0.018 0.003) 9.652 0.381 (0.380 0.015) 7.239 typ. (0.285) 7.620 0.254 (0.300 0.010) 4.064 typ (0.160) 0.813 0.102 (0.032 0.004) 8-0.800 dia. (8-0.031 dia.) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) 7.620 0.127 (0.300 0.005) 6.350 0.127 (0.250 0.005) 3.302 0.051 (0.130 0.002) pin 1 0.254 0.0127 (0.010 0.0005) dimensions mm (inches) pcb land pattern 9.398 0.127 (0.370 0.005) 6.350 0.127 (0.250 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.254 (0.300 0.010) 0 min / 0.102 max (0 min / 0.004 max) 2.286 max. (0.090 max.) 0.203 0.013 (0.008 0.0005) 0.635 0.127 (0.025 0.005) 9.652 0.381 (0.380 0.015) 0.457 0.076 (0.018 0.003) 2.159 0.025 (0.085 0.001) 2.54 (0.10) 8.70 (0.3425) 1.55 (0.0610) 0.65 (0.0255) 0.864 0.120 (0.034 0.004) pin 1 dimensions mm (inches) pcb land pattern 2.540 0.127 (0.100 0.005) 9.652 0.381 (0.380 0.015) 6.350 0.127 (0.250 0.005) 9.525 0.254 (0.375 0.010) 0.457 0.076 (0.018 0.003) 0.813 0.102 (0.032 0.004) 4.445 0.127 (0.175 0.005) 7.620 0.254 (0.300 0.010) 0.635 0.127 (0.025 0.005) 0.254 0.0127 (0.010 0.0005) 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 3.302 0.051 (0.130 0.002) pin 1
i ntegrated c ircuits d ivision specification: ds-laa120-r09 ?copyright 2012, ixys integrated circuits division optomos ? is a registered trademark of ixys integrated circuits division all rights reserved. printed in usa. 12/19/2012 for additional information please visit our website at: www.ixysic.com 7 laa120 ixys integrated circuits division makes no representations or warranties with respect to the accuracy or completeness of the co ntents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. neither circuit patent licenses nor indemnity a re expressed or implied. except as set forth in ixys integrated circuits division?s standard terms and conditions of sale, ixys integrated circuits division assumes no liability whatsoever, a nd disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringem ent of any intellectual property right. the products described in this document are not designed, intended, authorized or warranted for use as components in systems in tended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of ixys integrated circuits division?s product may resul t in direct physical harm, injury, or death to a person or severe property or environmental damage. ixys integrated circuits division reserves the right to discontinue or make changes to its p roducts at any time without notice. mechanical dimensions laa120str tape & reel LAA120PTR tape & reel dimensions mm (inches) user direction of feed notes: 1. dimensions carry tolerances of eia standard 481-2 2. tape complies with all notes for constant dimensions listed on page 5 of eia-481-2 embossment embossed carrier top cover tape thickness 0.102 max. (0.004 max.) 330.2 dia. (13.00 dia.) k 1 =4.20 (0.165) 0 k =4.90 (0.193) p=12.00 (0.472) w=16.00 (0.63) bo=10.30 (0.406) ao=10.30 (0.406) dimensions mm (inches) notes: 1. all dimensions carry tolerances of eia standard 481-2 2. the tape complies with all notes for constant dimensions listed on page 5 of eia-481-2 embossment embossed carrier top cover tape thickness 0.102 max. (0.004 max.) 330.2 dia. (13.00 dia.) user direction of feed p = 12.00 (0.472) w = 16.00 (0.63) bo = 10.30 (0.406) ao = 10.30 (0.406) k 1 = 2.00 (0.079) k 0 = 2.70 (0.106) 7.50 (0.295) 2.00 (0.079) 4.00 (0.157)
|
